51.2V110AH for e-golf cart, e-sightseeing car...

Water-resistant and firm ABS plastic casing. Built-in PCB protection. Battery weight: 56kg High drain up to 150A

Water-resistant and firm ABS plastic casing. Built-in PCB protection.Battery weight: 56kgHigh drain up to 150A Advantage of our module:

Water-resistant and firm ABS plastic casing. Built-in PCB protection.Prevent short circuit, over-current, over-heat, over-charge, over-discharge.The internal pack is stabilized by bracesAvoiding mechanical accidents caused by vibration

 

Specification:

 

Detailed Product DescriptionHigh drain up to 150A(30S); Humanized monitor interface available; Easy to install, expand,control and maintenance;

 

BMS: 

OCELL BMS consists of Master BMS Circuitry (we named “BMU”), Slave BMS Circuitry (we integrate it into our battery module) and contactor.

 

 Besides the basic functions such as over charge/ discharge, over current, short circuit, over temperature and balancing, Our BMS owns the following features

1. Master-Slave architecture makes the system flexible;

2. Two level warning makes maintenance easier;

3. CAN2.0 and industrial level electronic components make system reliable;

4. Contactor makes high rate charge & discharge feasible;

5. Periodic insulation measurement makes personnel safety possible;

6. Host can control the system easily; 

 

Battery module:

1. Modular design makes the system installation, maintenance easier;

2. Battery modules can be connected in series or parallel to make the system more flexible;

3. IP56 dust and water proof design suit for in severe circumstance;

4. Dual LED indicator makes the battery module status easy to know;

5. High accuracy SOC calculation;

 

No.	Item	Specification
1	Battery module	IFM12-1100E1(12.8V110Ah)
2	Assemble method	4S1P
3	Nominal capacity/Ah	110Ah
4	Nominal voltage/V	51.2V(12.8V*4)
5	Max. Charge voltage/V	≤58.4V(14.6V*4)
6	Discharge cut-off voltage/V	≥40.0V(10.0V*4)
7	Recommended charge current/A	≤55A
8	Discharge current/A	≤155A
9	Max. discharge current/A	≤300A(10S)
10	Weight/Kg	<61Kg
11	Approximate resistance/mΩ	<60mΩ
12	Dimension(for reference only)	depend on configuration
13	Temperature range	charge:0~45°C
		discharge:-10~50°C
14	Storage temperature	-10~45°C
15	Over voltage warning/V	62.4V(15.6*4)
16	Over voltage alarm/V	64V(16.0V*4)
17	Under voltage warning/V	44.8V(11.2V*4)
18	Under voltage alarm/V	36.8V(9.2V*4)
19	Over temperature warning/°C	60°C
20	Over temperature alarm/°C	65°C
21	Regeneration function	Depend on Motor controller

 

Application:

 EV such as E-scooter, golf cart/trolley, E-sightseeing car, postal van, road sweeper, industrial sweeper, ride-on floor sweeper,cleaning sweeper, sweeper floor, sweeper car.... 

Note:

1. Each battery module has one slave BMS circuitry inside;

2. Master BMS circuitry(we named BMU) collect all information from each battery module through

RS485, then decide to cut-off the contactor or not;

3. We strongly recommend customer to use two contactors (one for charge and another for

discharge) in the battery system.

4. We can connect more battery modules in parallel to expand the system capacity

 

More information, pls feel free to contact Coco Guo for support!

 

51.2V110AH for e-golf cart, e-sightseeing car...